Root Dan Install TWRP Samsung Galaxy J3 Pro 2017 (SM-J330G)


Root Dan Install TWRP Samsung Galaxy J3 Pro 2017 (SM-J330G) - Bagi kamu pengguna ponsel Android Samsung Galaxy J3 Pro 2017, yang ingin melakukan Root pada Ponsel kamu bisa ikut Tutorial yang akan saya jelaskan ini.

Catatan!!!
Ini hanya akan bekerja pada Samsung Galaxy J3 Pro yang masih Ber-OS Android 7.0 (Nougat). Tidak disarankan bagi yang sudah Upgrade ke Oreo mengikuti Tutorial ini, karena saya tidak menjamin keberhasilannya.

Bahan yang diperlukan untuk Root Dan Install TWRP Samsung J3 Pro (SM-J330G) :


Poin Penting!
Sebelmu Menginstall TWRP Pastikan Bawa OEM Unlock sudah ON/ENABLE pada menu pilihan pengembang. Jika belum ikut langkah berikut ini.
  • Cara menampilkan Pilihan pengembangan, Masuk Ke Pengaturan > Tentang Ponsel > Info Perangkat Lunak > Tap beberapa kali pada Nomor Seri.
  • Selanjutnya Untuk mengatur OEM Unlock (OEM Terbuka Kunci) Masuk ke Pengaturan > Pilihan Pengembangan > Klik Pada OEM Terbuka Kunci.
  • Masih dimenu Pilihan Pengembangan Scroll ke Bawah Klik Pada "Mendebug USB".

Cara Install TWRP :

#01. Install Samsung USB Drive di Komputer kamu.

#02. Buka dan Jalankan Odin3, Klik Pada Tab "AP" dan Masukan TWRP_3.1.1.1_j330g.tar

#03. Matikan Ponsel lalu hidupkan kembali ke "Mode Download" dengan cara Menekan Tombol Volume Bawah + Home + Power Secara bersamaan, Ketika muncul tulisan warning Tekan Tombol Volume Atas Satu kali.

#04. Sambungkan Ponsel Ke Komputer menggunakan Kabel USB. Pastikan bahwa Ponsel terbaca Oleh Odin3 ditandai dengan Muncul tulisan ID:COM.

#05. Klik START Untuk memulai Proses Install TWRP.

#06. Tunggu hingga proses instalasi selesai, ditandai tulisan PASS berwarna hijau.

#07. Untuk masuk ke TWRP, Hidupkan Ponsel dengan cara menekan Tombol Volume Atas + Home + Power Secara bersamaan.

#08. Pada Menu TWRP Klik Install > Select storage > Micro SD Card > Cari File no-verity-opt-encrypt-5.1.zip > Swipe to confirm flash.


Sampai disini proses install TWRP Sudah selesai.
Kita lanjutkan ketahap Root Samsung J3 pro.

Cara Root Samsung J3 Pro 2017 :

Masuk Ke Mode TWRP Kemudian Klik Install > Select storage > Micro SD Card > Supersu.zip > Swipe to confirm flash.


Untuk memastikan status Root, silahkan download aplikasi Root Checker atau Aplikasi sejenisnya di Play Store.


Terimakasih atas kunjungannya ke Blog ini, Silahkan disaher jika Artikel ini bermanfaat...

Postingan populer dari blog ini

Clone Samsung J2 Prime SM-G532F/H/M 100% Tested Firmware Download MT6572__lmkj__J2_Prime__J2_Prime__6.1__ALPS.KK1.MP7.V1

Gambar
MT6572__lmkj__J2_Prime__J2_Prime__6.1__ALPS.KK1.MP7.V1 Reading Flash Content now ...  Brand     : lmkj ProdName  : J2 Prime ProdModel : J2 Prime Device    : J2 Prime AndroidVer: 6.1 MTKxCPU   : MT6572 MTKxPRJ   : ALPS.KK1.MP7.V1 [Read Ok] : preloader_lokyee72_cwet_kk_m18.bin ( size 100kb) [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6572 / V1.1.1 / lokyee72_cwet_kk_m18 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 846 MiB Scatter saved to : C:\Users\GSM\Desktop\READ\MT6572__lmkj__J2_Prime__J2_Prime__6.1__ALPS.KK1.MP7.V1\ All done! its paid firmware BDT 100TK Download
Baca selengkapnya

Ikon IK-785 SP5735 Tablet Pac Firmware free Download Read by CM2

Gambar
Ikon IK-785 SP5735 PAC Firmware Info : Brand : IK-785 Model : scx35_sp5735c2ea CPU : sp5735c2ea IntName : scx35_sp5735c2eaplus_s706_mipi_UUI Version : 4.4.2 Project : IK785-BATCH-No:C16-20160318 ExtInfo : IK-785 PAC Info : SP5735C2EA_scx35_sp5735c2ea_4.4.2_IK785-BATCH-NoC16-20160318_IK-785 Ikon IK-785 SP5735 techgsmpro Ikon IK-785 SP5735 techgsmpro Ikon IK-785 SP5735 techgsmpro DOWNLOAD LINK GOOGLE DRIVE
Baca selengkapnya

HUAWEI CLONE P10 NAND flash file firmware Download MT6572_NAND_P10__P10__P10__4.4.2__HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312

Gambar
Device Brand   :   HUAWEI CLONE P10 Device Model   : P10 Device CPU     : MT6572_NAND Device IntName : P10 Device Android Version : 4.4.2 Device Compile : 3/11/2017 12:48:23 PM Device Project : HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312 MT6572_NAND_P10__P10__P10__4.4.2__HS_KUNLIN_FOREIGN_F4_P10_V0.1_20170312 preloader_q3_m144_b15_kunlin_f4_p10.bin : SIZE: 94kb its paid firmware: BDT 100tk DOWNLOAD
Baca selengkapnya

Okapia Shopno firmware download: SP7731GEA_Shopno_5.1_Oka_A10_M10_Shopno_MF_V05_20160331_Shopno

Gambar
Read info Chinese Miracle II  [SPD module] v 1.27 Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0] Start  at : [7/18/2017 / 4:13:41 PM] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys  -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key  3. Insert cable  ====  Wait for phone... Phone found! [ 3 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FLASH : eMMC Flash , Structure : Ok! Reading extended info ...  Model Name  : Shopno Model Brand : Okapia Model Device: Shopno AndrVersion : 5.1 BaseBand CPU: SP7731GEA CompileDate : 3/31/2016 5:39:57 AM Project Ver : Oka_A10_M10_Shopno_MF_V05_20160331 Model Ext   : Shopno Read firmware logs - > Wait phone connected ......
Baca selengkapnya

Download MIUI 9 Beta 7.8.17 China Developer For Mi 5s Via Fastboot

Gambar
Download Download Firmware: Mi 5S Miui 9 7.8.17 Beta (2.5GB) Tutorial Detils Change Log #1. Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable. #2. Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer. #3. Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step. Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device. #4. Wait until the progress bar inside MiFlash turns fully green, which m...
Baca selengkapnya

Firmware Oppo A37 / A37F (Unbrick / Vibrate Only)

Gambar
Secara umum firmware/stock rom ini berguna untuk mengatasi kerusakan Software seperti Bootloop / Unbrick / Stuck Logo / Mati Total karena rusak software / Dead After Flash, Lock screen dan kerusakan software lainnya. E dl mode : vol up + vol down , jangan lupa centang reset when download . Untuk lebih jelasnya bisa lihat video tutorial dibawah ini. Cara Flashing Oppo A37 Menggunakan Msm DownloadTool DOWNLOAD : Driver Qualcomm pass : tuserhpdotcom Oppo_A37F_Firehose.rar A37fEX_11_A.05_160523.zip A37fEX_11_A.20_170506.zip A37fEX_11_A.23_170701.zip A37fEX_11_A.30_171209.zip A37fwEX_11_A.27_170919.zip A37fEX_11_A.22_170522.rar ( fix dead after flash ) Mirror Link : Oppo_A37_A37F_Firehose.rar A37fEX_11_A.22_170522.rar  (mega) A37fEX_11_A.22_170522.rar  (mshare) TRY At Your Own Risk ( silahkan dicoba , resiko ditanggung sendiri ) Read more : Remove lock pattern oppo A37 without lost data BUKA KUNCI POLA OPPO A37 TANPA HILANG DATA #Extra tag : A37fEX Oppo A37fEX Flashing Oppo A37 Op...
Baca selengkapnya

Download MIUI 9 Beta 7.8.17 China Developer For Mi 5 Via Fastboot

Gambar
Download Download Firmware: MIUI 9 Beta 7.8.17 China Dev 2.5GB Tutorial Detils Change Log #1. Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable. #2. Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer. #3. Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step. Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device. #4. Wait until the progress bar inside MiFlash turns fully green, which ...
Baca selengkapnya